Single lip (plastics) T inch mm Tool length Cutting length Ref. carbide 0.040’’ 1.00 39 mm (1.535’’ ) 4.00 mm (0.160’’ ) 48736 0.080’’ 2.00 39 mm (1.535’’ ) 8.00 mm (0.315’’ ) 48737 0.120’’ 3.00 39 mm (1.535’’ ) 10.00 mm (0.400’’ ) 48738 Gravoply™, Metallex™, Gravoglas™, Acrylics Aluminium, brass or ACM (Aluminium composite), HPL panels (High Pressure Laminate) Recommended for Suitable for T Solid carbide single lip upward spiral specifically designed for cutting and milling into plastics and Stratified (HPL) with straight edge finishing. Conical helical T inch mm Tool length Ref. carbide 0.005’’ 0.15 38 mm (1.260’’ ) 23077 Aluminium, brass Gravoply™, Metallex™, Gravoglas™, Acrylic, phenolic, gold, silver Recommended for Suitable for T Solid carbide upward spiral developed for deep engraving of soft materials. Standard cutting profile produces a 30° cut into plastics and non ferrous metals. CUTTERS & INSERTS 112 PERCUT 3.00 MM 3/4 conical T inch mm Tool length Ref. carbide 0.002’’ 0.05 38 mm (1.496’’ ) 70613 0.005’’ 0.15 38 mm (1.496’’ ) 70612 Steel (highly allied or not), stainless steel, cast iron and these alloy, copper and these alloy, gold & silver Aluminium, plastics, graphits Recommended for Suitable for T 3/4 conical cutter designed for industrial identification or jewellery customisation. Thanks to its revolutionary technical design, this type of cutter is very effective for fine marking and shows a high level of wear resistance.
RkJQdWJsaXNoZXIy MTg0MDcwNg==