100 Cutters 1/8” HSS cutters for ferrous metals for deep engraving in steel and ferrous metals Cutting width Part Number 0.005 33910 0.010 33911 0.015 33912 0.020 33913 0.030 33914 0.040 33915 0.060 33916 0.090 33917 0.125 33918 1/8” Wide Angle cutters for painted, or coated aluminum, brass and soft metals Gravoxal, Gravometal Colored Aluminum, Trophy Brass, Colored and Marbled Steel Cutting width Part Number 0.010 33888 0.015 33889 0.020 33890 0.030 33892 0.040 33893 0.060 33894 1/8” Quarter Round cutters for stainless steel and other hard metals Cutting width Part Number 0.005 33943 0.015 33944 0.020 33945 0.030 33946 0.040 33948 0.060 33919 0.090 33950 Compatible with: M20Jewel, M20 3 Axis, M20 4 Axis, IM4 IM3, ITM, ITL and IF3 machines. Unless otherwise stated, cutter length is 4-5 inches (101.6 mm - 127 mm). ONECUT 1/8" (3.17mm) SHANK SIZE 11/64" (4.36 mm) SHANK SIZE 11/64” Burnishing cutters for coated and polished metals Trophy Brass, Colored and Marbled Steel, Gravoxal, and Gravometal Maximum depth .002 (use light pressure setting for best results) Cutting width Part Number 0.005 34036 0.010 34037 0.015 34038 0.020 34039 0.030 34041 0.040 34042 0.060 34043 0.090 34044 11/64" Carbide cutters for plastic Gravoply 1 & 2, Ultra, Gravolase, Metallex & Metallex 2 Cutting width Part Number 0.005 34012 0.010 34013 0.015 34014 0.020 34015 0.030 34017 0.040 34018 0.060 34019 0.090 34020 0.125 34021 0.171 34022 11/64” Carbide cutters for Gravostrat Cutting width Part Number 0.005 33989 0.010 33990 0.015 33991 0.020 33992 0.030 33993 0.040 33994 0.060 33995 0.090 33996 0.125 33997 0.171 33998 11/64” Radius Cutters for rounded cut Use reverse engraving on Gravoglas for neon tube look. Also used for gasket grooves & 3D milling Material Type Part no. Gravoply 34086 Phenolic 34086 Acrylic 34086 Ferrous Metals 34086 Aluminum 34086 Choose radius (1/32", 1/16", 3/32", 1/8", 5/32") 11/64” Parallel cutters for 90° cut outs Material Type Part no. Gravoply 34023 Phenolic 33999 Acrylic 34118 Ferrous Metals 34010 Aluminum 34034 Compatible with TXL, IS, M and Vanguard series machines.
RkJQdWJsaXNoZXIy MTg0MDcwNg==