102 Cutters www.gravostoreUSA.com ONECUT There are 2 main types of fonts for engraving: TrueType (print fonts), and pre-engineered engraving fonts. TrueType fonts are outline fonts. They can be filled for a solid, bold look. Filling requires the engraving program to calculate the tool paths. Engraving fonts are pre-engineered fonts with optimized tool paths, designed for reducing engraving time and optimising engraving quality. Engraving fonts are optimized with reduced tool lifts, tool paths start from the inside of a contour - so you don’t lose the leading edge of a filled contour which causes “dimpling”. Tool path direction is predetermined for high quality engraving. The engraving path order is optimized as a time saving measure. Use single-line fonts to increase production speed. When selecting cutters, please use the B chart above as a guideline for choosing the appropriate sized tip for engraving. Font types are critical to engraving quality and time Compatible with 1/4" Collet spindles and Vanguard series machines. 1/4" Burnishing cutters for coated and polished metals Trophy Brass, Colored and Marbled Steel, Gravoxal and Gravometal Maximum depth .002 (use light pressure setting for best results) Cutting width Part no. .010 34207 .015 34208 .020 34209 .040 34212 .060 34213 .090 34214 1/4" Carbide cutters for plastic GPLY I & II, Ultra, Gravolase, Metallex & Metallex 2 Cutting width Part no. .005 34184 .010 34185 .015 34186 .020 34187 .030 34189 .040 34190 .060 34191 .090 34192 .125 34193 .171 34194 .250 34196 1/4" Carbide cutters for Gravostrat and Gravoply 2-Plex Cutting width Part no. .005 34158 .010 34159 .015 34160 .020 34161 .030 34162 .040 34163 .060 34164 .090 34165 .171 34167 .250 34169 1/4" Carbide cutters for Acrylic All Gravoglas and Acrylic 35 ° cutting angle for deep engraving Cutting width Part no. 0.010 34273 0.015 34274 0.020 34275 0.030 34276 0.040 34277 0.060 34278 0.090 34279 1/4" Radius cutters for rounded cut Use reverse engraving on Gravoglas for neon tube look. Also used for gasket grooves & 3D milling Material Type Part no. Gravoply 34259 Phenolic 33999 Ferrous metals 34010 Choose radius (1/32", 1/16", 3/32", 1/8", 5/32") 1/4" (6.35 mm) SHANK SIZE
RkJQdWJsaXNoZXIy MTg0MDcwNg==