126 Machines, software & accessories LASER PARAMETERS Plastics Laser Power Speed Passes Focus Refocus Air Type Dpi Thickness Comments Gravoply™ Laser 10% 100% 1 - Before no Vector 50040% 100% 1 - Before no Raster 50080% 30% 1 - Before yes Cutting 500 0.8mm (.030") 100% 28% 1 - Before yes Cutting 500 1.3mm (.050") Gravoply™ Ultra 10% 100% 1 - Before no Vector 50040% 100% 1 - Before no Raster 50070% 40% 1 - Before yes Cutting 500 0.5mm (.020") 100% 25% 1 - Before yes Cutting 500 1.6mm (1/16") 100% 10% 1 - Before yes Cutting 500 2.4mm (3/32") Gravoply™ 2 10% 100% 1 - Before no Vector 50050% 100% 1 - Before no Raster 500Gravoglas™ 1 80% 40% 1 - Before no Vector 500 - Subsurface engraving 80% 40% 1 3.0mm (1/8") Before no Raster 500 - Subsurface engraving 100% 18% 1 - Before yes Cutting 500 1.5mm (1/16") Keep the plastic film on 100% 10% 1 - Before yes Cutting 500 3.0mm (1/8") Keep the plastic film on 100% 5% 1 - Before yes Cutting 500 5.0mm (.20") Keep the plastic film on Acrylic 30% 100% 1 - Before no Vector 50060% 100% 1 - Before no Raster 500100% 8% 1 - Before yes Cutting 500 3.0mm (1/8") 100% 5% 1 - Before yes Cutting 500 5.0mm (.20") 100% 1% 1 - Before yes Cutting 500 10mm (.40") Gravotac™ Exterior 50% 20% 1 - Before yes Cutting 500 0.8mm (.030") 100% 25% 1 - Before yes Cutting 500 1.6mm (1/16") Flexilase™ 10% 100% 1 - Before no Vector 50030% 100% 1 - Before no Raster 500 - Gravogrip advised 100% 5% 1 - Before yes Cutting 500 0.25mm (.01") Stickalase™ 10% 100% 1 - Before no Vector 50040% 100% 1 - Before no Raster 500 - Gravogrip advised 20% 30% 1 - Before yes Cutting 500 0.09mm (.004") Gravostrat™ 50% 60% 1 - Before no Vector 500100% 60% 1 - Before no Raster 500Rubbalase™ 100% 20% 1 -1.5mm (-1/16") Before no Vector 500100% 20% 1 -1.5mm (-1/16") Before yes Raster 500100% 5% 1 Before yes Cutting 500 2.2mm (.087") CO2 Laser parameters for: LS100, LS100Ex (40 W) This document provides a base of engraving parameters to be used on Gravotech laserable materials. They are indicative values that can be subject to modification, that are recommended by professional engravers and have been tested and verified for the LS100Ex & LS100 40 W.
RkJQdWJsaXNoZXIy MTg0MDcwNg==