127 Machines, software & accessories LASER PARAMETERS Call 1.800.843.7637 to order or visit www.gravostoreUSA.com TECH TIPS The purpose of this document is to help each engraver get an idea as to how to engrave on Gravograph laserable materials. The parameters are sorted by product range. Every material can have up to 3 different types of engraving process: - Vector, for lightweight linear tracing - Raster, for heavy marking - Cutting Some materials may not be engraved with a certain type of engraving process: if the specific type is not in the grid of the material, then it's most likely that it we do not recommend this engraving method on the indicated material. Metallics Laser Power Speed Passes Focus Refocus Air Type Dpi Thickness Comments Gravolase™ Metallics 10% 100% 1 - Before no Vector 50040% 100% 1 - Before no Raster 50070% 40% 1 - Before yes Cutting 500 0.5mm (.020") 100% 25% 1 - Before yes Cutting 500 1.6mm (1/16") Metallex™ 10% 100% 1 - Before no Vector 50040% 100% 1 - Before no Raster 500 - All Metallex™ material surfaces Gravoxal™ 30% 100% 1 - Before no Vector 500 - All Gravoxal™ material surfaces 50% 100% 1 - Before no Raster 500 - All Gravoxal™ material surfaces AlumaMark® 30% 50% 1 - Before no Vector 50030% 80% 1 - Before no Raster 500DuraBlack® 20% 80% 1 - Before no Raster 500Floating Pin Table Cutting-When using a floating pin table, place an aluminumplate under the strips to avoid laser reflection to prevent engraving under the material. Gravogrip™ Raster - Use Gravogrip™ when engraving on thin materials as they can have uneven surfaces. - Avoid using too much power when engraving to prevent damage to the Gravogrip™ plate. Nb : in case of unexpected behavior during the engraving process, please refer to the machine's User Manual for troubleshooting.
RkJQdWJsaXNoZXIy MTg0MDcwNg==