www.gravostoreUSA.com Caution: these coloring products require special safety measures. Use them in well ventilated rooms only and wear suitable protective clothing and gloves. CerMark Process: All products work with most uncoated metals. Excellent for metal marking with a CO 2 laser. Read instructions carefully before use. Engraving Supplies Description Part Number TherMark laserable tape 1" wide 48315 TherMark laserable tape 2" wide 46255 TherMark laserable tape 3" wide 48314 Description Part Number TherMark LMM14 6 oz aerosol spray 47821* TherMark LMM14 50g liquid paste 47822 TherMark LMM14 250g liquid paste 47823 Description Part Number Cermark LMM6000 12 oz aerosol spray 31086* Cermark LMM6000 50g liquid paste 45694* Cermark LMM6000 250g liquid paste 31085* Cermark LMM6000 500g liquid paste 50808* Cermark LMM6000 Paste 1000Gram 77733 LMC-6044P Prem Blk Paste 250g 78262 LMC-6044 Aerosol Prem Blk Paste 50g 78263 LMC-6044P Black Aerosol Spray Glass 12 oz 78264 LMM6151 Copper Metal Mark 50G 80984 TherMark laser marking tape For efficient dry permanent marking TherMark laser marking spray & pastes Water-based for fast clean up Cermark laser marking spray & pastes Solvent-based for easy handling before marking TherMark tape is an ideal product for expanding the range of materials that can be marked with a CO2 laser engraver. Available in a 50ft roll in 3 standard widths (1”, 2” & 3” wide), it can be used to create high contrast, permanent black marks on bare, plated and anodized metals. Cut the tape to the size of the mark, then simply apply by hand and engrave with a 30W and above laser. The excess tape is then peeled off to reveal the final mark. This product is suitable for outdoor use. TherMark liquid pastes allow most metals to be quickly marked using a CO2 laser engraver. A thin coat of material can be painted or sprayed onto the metal, then left to dry for less than 2 minutes. Engrave with your laser of 25W or greater to produce high contrast, permanent black marks. The excess water-based materials can be easily washed off to reveal the final mark. Cermark metal marking pastes also allow most metals to be marked using a CO2 laser engraver. Similar to TherMark liquids, the Cermark products contain a hardener that allows the products to be easily handled prior to marking with your laser. The final result is the same permanent black marks on a range of bare metals. Good for CO2 lasers, 25W and above. Laser Metal Marking * These items are shipped via ground transportation only. COLORING TherMark® CerMark® 68
RkJQdWJsaXNoZXIy MTg0MDcwNg==